If your interior doors require restoration, then it’s realistic to do this job yourself, following the sequence masterseptika.ru and paying attention to the subtleties.
First you need to remove the old surface. To do this, apply a unique agent to the exterior, which will help to remove paint and varnish. Following that, bide your time and remove unwanted paint. When it isn’t entirely eliminated, it is possible to remove it with an iron.
Next, start the work of recovery. To do this, you need to sand the outside, using sandpaper and moving across the fibers. If you discover defects, they need to be eliminated. Acrylic putty will do an excellent job because of this. Decorating with a routine or picture
There Are a Number of Ways to restore worn or damaged doors:
- A simple alternative is to glue the components with background;
- Individualize the door with the support of painting, by way of example, by stenciling;
- Disguise slight damage, and at precisely the identical time and upgrade the layout with vinyl stickers – cheap and original;
- Overhead fronts of distinct substances are going to be a great choice for overhauling the canvases;
- replacement of fittings, or its decoration may also help update inside doors.
The technology of work depends on the type of reconstruction chosen. Wallpapering
Wallpapering the doorway parts using background – this can be an economical way of restoration. But it’s extremely effective. Photo compositions or stained canvases seem great. Instructions:
- After cleaning the components of the door from the outdated decorative end, it is treated using primer;
- The wall-paper is trimmed to the size of details of the leaf and architraves;
- Apply glue to the surface using a roller or brush;
- Background glued into the fabric and smoothed using a roller to remove air bubbles and paste residues.
- Will continue such a design is not long, but this procedure is acceptable for the restoration of cheap models.
Not a bad alternative for interior renovation will be decorating doorways with painting under a stencil. It is created by yourself or buy readymade. A stencil using a routine is connected to the pre-prepared base. Finishing is performed with colored paints. Vinyl stickers
An intriguing method to finish canvases and boxes made from metal or wood will be vinyl stickers. They are handy because they are self-adhesive. Drawings are glued to any parts of the plan, they’re selected under a particular style of design of the room. Overhead facades
Often such finishes are produced from MDF panels. About the door leaf or frame they are mended with adhesive or self-tapping screws. But restorations will also be made of different substances. Decor of fittings
Hinges, locks or handles on doors are decorated with an assortment of paints. Antique parts are given an old appearance, using specific means for the specific material. Prior to completing, the equipment is taken out of the structure. Old-style components are often replaced with new components.
How to update an outdated wooden interior door? Occasionally only old hinges which have worn out need to be substituted. Repair is not hard:
- Unscrew the screws and remove the obsolete hardware;
- fix the springs on the door foliage;
- the structure is attached to the frame so that the fastening points are adapting;
- initial screw the top hinge and the reduced one.
- How do you restore an inside door? There are lots of ready-made options for it. Implementing creativity, it is not tricky to finish structures in a single style.
In the plan of the assumptions, doors play a significant part. There are several unique models in stores, but high quality ones cost a great deal of cash, and you typically do not want to check out the cheap ones. There’s a fantastic choice – to update the old doors using their very own hands. There are various techniques, and not the most complex, which allow for just a small money to repair the situation.