Technology of Placing gypsum tiles along with your hands

Gypsum tiles have to be laid correctly, as not only the aesthetic appearance of cosmetic facing, but in addition the service

quality of the material will be based on the technology of job. The product is also universal, and it may be connected to plaster,

concrete, brick or gypsum board sheets, and provided that the top layer of the foundation is even and has no flaws.

If the defects of this foundation are significant, it ought to be completely treated with primer, then a cement mortar is created,

which fills all the cracks. Then the surface ought to be repeatedly primed and dried. Primer therapy is essential to improve the

bond between the tile and the wall. In this case, its makeup should choose a particular, containing components that prevent the

appearance of fungus and mold.

In the modern interior of these rooms most often used gypsum tiles, even imitating natural brick or stone. To carry out decorative

finishing your self, it’s essential first of all to pick a scheme of tile positioning and prepare a remedy. It’s important to pay

attention to the reverse side of the material. If its surface has an embossed surface, then the adhesive ought to be placed having

an even trowel, and if it is even, then using a notched one.

The technology of this job is as follows:

* A thin coating of glue is applied to the pre-prepared wall. It is distributed over the base so it is possible to put 4-5

tiles. Decorative cladding can be put either on plasterboard, and on putty.

* Glue the back side of the tiles with adhesive.

* Plaster components are pushed against the walls and their location is corrected. To align with the seams, it is suggested to

use spacers.

* Finishing is performed in rows, each of which should be changed by half of a tile. Facing is carried out into the corners of

the space, then immediately get rid of any residual mortar in the joints.

Drying the walls takes no longer than a day and demands a continuous humidity and temperature within the room. The last stage in

the laying of gypsum tiles is the decor. To do this, the joints between these elements are full of a special solution, the shade

of which suits the brick.

Decorative imitation of brickwork around the walls is completed in the following manners:

* Cutting the plastered surface of the seams of masonry with a bolt cutter along with your hands;

* placing of tiles beneath the brick:

* mimicking the structure and color of the side surface of one brick;

* Imitating a fragment of brickwork of many bricks.

The very best method to decorate »beneath the brick » is the one that enables you to make a functional coating together with the

most appearance of its resemblance to natural masonry. All 3 ways to conduct this kind of finishing functions meet the

prerequisites, however, the cutting edge of joints using a bolt will be labor-intensive and also the formation of large quantities

of dust, and so let’s consider more ordinary manners.

The old finish is removed from the walls, and the outside, if necessary, is leveled to eliminate the need to glue plaster on a

thick coating of adhesive.

Combining such cladding with other kinds of interior finishes may be both systematic and performed with no clear consequences,

chaotically, with fake of indications of aging.

With the support of cosmetic gypsum tiles it is possible to imitate a lot of textures. masterfasada.ru

A large number of textures may be imitated with the support of decorative gypsum tiles.

The wall on which it’s to be installed must possess the following characteristics:

* Hardness and strength of the outside;

* The lack of irregular locations and sharp sections;

* no more deformations.

Decorative tiles at the interior of the kitchen

Walls are created from a number of materials, let us break down the principles of installment.

When dealing with concrete, there will be no huge problems. It is simply required to take into consideration the porosity of the

material. Concrete, which has virtually no pronounced pores, should be treated with a fantastic primer.

Mounting gypsum tiles concrete

Before beginning work on the installation of gypsum tiles to the walls, then it’s well worth checking the strength of their

surface. After the plaster doesn’t fall off the walls and in exactly the exact same time holds well, you can simply paint it using

primer.

Mount the tiles onto the painted concrete should not. The surface should be scratched, making sure to misfire, then it should be

grouted and coated with a layer of plaster.

Laisser un commentaire

Votre adresse de messagerie ne sera pas publiée. Les champs obligatoires sont indiqués avec *